Roger Peine
4th September 2000, 10:10 AM
You could email Ryobi and ask them!!!
[email protected]
Or you could do as i did, i use an old train set controller dial it to approx' 2-3 volts higher than the battery charge voltage. I also increased the size of the transformer from 500 milliamp to 1 amp. This works fine for me. Ryobi battery chargers are relatively in-expensive, I was quoted for a 15.6 volt charger, $24- . My recycled/home modified one works real good though.
Hope this is of some help to you .