Chrome
6th June 2012, 02:36 AM
Here's a picture of my first two bowls produced on my new Jet lathe. Lathe arrived Friday, first bowl Saturday, second bowl Sunday. They are mahogany and tulipwood respectively. I'm not too happy with the mahogany one as the tooling marks are still visible inside, but the tulipwood one I'm happy with, even though in the photo it looks as if there is damage on the rim, it's just a trick of the light.
http://farm8.staticflickr.com/7088/7329618524_c2cdcda4ea_b.jpg
Here's a couple of my new lathe installed in the workshop... the tulipwood bowl can be seen in the cole jaws.
http://farm8.staticflickr.com/7215/7329619708_e95f60e0a4_b.jpg
http://farm9.staticflickr.com/8152/7329619128_14a6c57a60_b.jpg
Cheers, Chrome
http://farm8.staticflickr.com/7088/7329618524_c2cdcda4ea_b.jpg
Here's a couple of my new lathe installed in the workshop... the tulipwood bowl can be seen in the cole jaws.
http://farm8.staticflickr.com/7215/7329619708_e95f60e0a4_b.jpg
http://farm9.staticflickr.com/8152/7329619128_14a6c57a60_b.jpg
Cheers, Chrome