crowie
8th June 2012, 09:47 PM
My wife asked if I could make a "Cheese Board" as a gift for a friend at work.
I did a bit of hunt around the shed to find a nice piece of timber.
I found an old fllor board, about a metre of the old 6" hardwood flooring.
Well did it look very pretty when I did a cleanup cut on its end.
Took off the tongue & groove cutting 2 pieces about 200mm.
Biscuit joined them together to make an almost square.
Put the joined section through the thicknesser to remove the ribs on the bottom.
Routed the edge and did lots of sanding.
I think it's come up okay.
Cheers, crowie
PS - Can someone identify the type of timber please!!
211523
211524
211525
211526
211527
211528
211529
211530
211531
211532
I did a bit of hunt around the shed to find a nice piece of timber.
I found an old fllor board, about a metre of the old 6" hardwood flooring.
Well did it look very pretty when I did a cleanup cut on its end.
Took off the tongue & groove cutting 2 pieces about 200mm.
Biscuit joined them together to make an almost square.
Put the joined section through the thicknesser to remove the ribs on the bottom.
Routed the edge and did lots of sanding.
I think it's come up okay.
Cheers, crowie
PS - Can someone identify the type of timber please!!
211523
211524
211525
211526
211527
211528
211529
211530
211531
211532