Sturdee
9th June 2012, 03:43 PM
Using some small off cuts of Corian I made this segmented square shallow bowl.
The pieces were glued together using medium CA glue and left to cure for a day before trimming square on the table saw. I held it on Cole jaws to centre the piece and clamped it to it with some small clamps in order to turn the shallow inside . Size is 130*40mm. No machine sanding but all hand sanded and polished.
Here is the front view:
211640
and the
211639
and finally the bottom.
211641
Took a while but it will look nice on my desk to hold paperclips, etc.
Enjoy.
Peter.
The pieces were glued together using medium CA glue and left to cure for a day before trimming square on the table saw. I held it on Cole jaws to centre the piece and clamped it to it with some small clamps in order to turn the shallow inside . Size is 130*40mm. No machine sanding but all hand sanded and polished.
Here is the front view:
211640
and the
211639
and finally the bottom.
211641
Took a while but it will look nice on my desk to hold paperclips, etc.
Enjoy.
Peter.