Where do you get those little screws?

[Cliff Rogers]

Online?

I need some small screws for guitar machine heads... 3 or 4 gauge chrome if possible.

[Avery]

I'm not really sure what sort of screws you want, but this place has lots of small screws in all sorts of materials.

Screws - Self Tapping - Countersunk Head Product Listing (http://www.smallparts.com.au/store/partslist/screwsselftappingcountersunkhead/screwsselftappingcountersunkhead/wide/1/)

[A Duke]

Hi Cliff,
Check out
Screw-It-Screws – SACHYS Industries – Australian distributor of the Robertson Square Drive screw system (http://www.screwit.com.au/)
and or
Veneer Inlay Australia (http://www.veneerinlayaustralia.com.au/) and go into the Box makers link

Regards

[homesy135]

I've dealt with Stewart MacDonald in the US:

STEWMAC.COM : Guitar Parts, Bass, Banjo, Mandolin, Hardware, Tools, Supplies, Free Information (http://www.stewmac.com/)


They have a range of little fasteners and tooling for building musical instruments.

[Cliff Rogers]

I'm not really sure what sort of screws you want, but this place has lots of small screws in all sorts of materials.

Screws - Self Tapping - Countersunk Head Product Listing (http://www.smallparts.com.au/store/partslist/screwsselftappingcountersunkhead/screwsselftappingcountersunkhead/wide/1/)
Ta, only have counter sunk.
Small Parts And Bearings Information (http://www.smallparts.com.au/store/partslist/screwsselftappingcountersunkhead/Screwsselftappingcountersunkhead/wide/1/2.52mm%283Gauge%29/)



Hi Cliff,
Check out
Screw-It-Screws – SACHYS Industries – Australian distributor of the Robertson Square Drive screw system (http://www.screwit.com.au/)
and or
Veneer Inlay Australia (http://www.veneerinlayaustralia.com.au/) and go into the Box makers link

Regards
Ta, this might work, requires a special driver bit.
Pan head steel screws (http://www.screwit.com.au/online-catalogue/wood-screws/pan-head-steel-screws/pan-hd-steel-screws-4g-x-12mm-zn-pl)

This looks like the best so far.
Phillips Head Nickel plated (2) - Veneer Inlay (http://www.veneerinlay.com.au/63-phillips-head-nickel-plated?p=2)



I've dealt with Stewart MacDonald in the US:

STEWMAC.COM : Guitar Parts, Bass, Banjo, Mandolin, Hardware, Tools, Supplies, Free Information (http://www.stewmac.com/)


They have a range of little fasteners and tooling for building musical instruments.
Yup, thanks, bit exxy but just the thing for the job.
STEWMAC.COM : Replacement Tuner Screws (http://www.stewmac.com/shop/Hardware,_parts/Electric_guitar:_Screws_springs/Replacement_Tuner_Screws.html)

[AlexS]

I've found Metro Bolts (http://www.metrobolts.com.au) in Melbourne have a pretty good selection of threaded goods.

[LGS]

Hi Cliff,

Long time no speak!

You could try Maton Guitars in Melbourne. They're generally very helpful. (I have a couple of their products!)
Either they could send you some or tell you where they get them I s'pose.

Welcome to Maton Guitars | Maton Guitars Australia (http://www.maton.com.au/)

Telephone: +61 3 9896 9500

Regards,

Rob