PDA

View Full Version : Looking for Soren Berger Sphere Calipers



Bitshird
20th November 2012, 04:33 AM
G'Day, would one of you kind folk have an Idea where a Yank could purchase a set of these Soren Berger Sphere Calipers, I tried his web site, but it's under construction, My understanding is the Gent is from New Zealand, but I thought perhaps some one may have seen some at a shop in Australia. No one in the US that I could find has them, and I'd even be willing to buy a used set.
Thanks
Ken

Mobyturns
20th November 2012, 06:33 AM
Try Timberly Woodturning (http://www.timberlywoodturning.co.nz/). If Terry Scott doesn't have it he would probably have the contacts to find one for you!

mkypenturner
20th November 2012, 06:51 AM
hi ken
or try david here S/E QLD Woodworking Supplies (http://www.woodworkingsuppliesqld.com.au/) email him as i know he had some of sorens stuff for sale

Paul39
20th November 2012, 12:10 PM
I find:

Starbond Europa (http://www.starbond-europa.de/index.php?cPath=225)

And from 2008:


<tbody>
Turning a Perfect Sphere with Soren Berger:




At the June 2008 FRW meeting Soren Berger demonstrated use of his Sphere Calculating Caliper. Unfortunately we were unable to capture this demo on video, so here is a 13:47 minute video click here for the video (http://www.frontrangewoodturners.org/howto/caliper.wmv) of Soren’s technique that he very kindly agreed that we could post on our website. Soren desired to point out that these calipers, along with his other products such as compression rings, are available from Craft Supplies, USA ; Packard Woodworks; and Highland Hardware.



</tbody>

Video available from here:

Front Range Woodturners - The Learn How To Page (http://www.frontrangewoodturners.org/howto/index.html)