View Full Version : New Spin Top
marshalltucker
26th March 2013, 12:13 AM
A top I made from polyester resin, 6061 aluminum , brass and cocobolo
issatree
26th March 2013, 10:28 AM
Hi Marshall,
Yeh, that is a Top Top.
Are you in Texas Australia or Texas USA.
marshalltucker
26th March 2013, 10:57 AM
I'm in Lubbock, Texas. USA
marshalltucker
26th March 2013, 04:54 PM
Not quite sure why this was moved, I did make parts of it on my ot lathe, the aluminum and the top resin piece were cut with a 16 lobe rosette.
RETIRED
26th March 2013, 09:33 PM
Not quite sure why this was moved, I did make parts of it on my ot lathe, the aluminum and the top resin piece were cut with a 16 lobe rosette.I moved it here as it was the most appropriate place as it seemed the majority of was turned in the normal fashion.
You gave no indication that it was done on an OT lathe.
marshalltucker
26th March 2013, 09:57 PM
I see
artme
27th March 2013, 02:02 PM
Looks great!!!:2tsup::2tsup::2tsup:
Almost looks like a kit the way you present the parts.
marshalltucker
27th March 2013, 03:46 PM
Thanks for the comment, it's not a kit though. I turned all of it on a wood lathe using an easy detail like tool on the metal pieces then cutting then on the rose engine.