orificiam 12th July 2013, 10:38 AM I recently built two beds, with Radiata Pine, with lots of scrap pieces left I built these two Amphora, I did It more or less as an exercise in precision, as most of you know Pine is not very friendly to turn as the fiber lifts very easy, so for the final passes I applied sanding sealer to the wood and it did the Job.
if you look closely you'll see that all the rings are at the same level , and this was realized checking the height of each ring, before and after glueing , wall thickness 4mm, dimessione 280x95mm
Finishing EEE-Ultrashine and Shellawax.
Cheers Tony.:)
276514
276515
276516
Wongo 12th July 2013, 11:01 AM Beautiful work.
Make another 8 and you can do ten pin bowling :D
orificiam 12th July 2013, 06:20 PM Beautiful work.
Make another 8 and you can do ten pin bowling :D
Thanks Wongo, I'd have to use a Polystyrene Bowling ball. so as not to break the pins.:roll::roll:
Cheers Tony.:)
dr4g0nfly 12th July 2013, 08:44 PM Stunning work and a good shape, especially for a pair of that size.
orificiam 12th July 2013, 09:44 PM Stunning work and a good shape, especially for a pair of that size.
Thanks Dragon, you're very kind.
Cheers Tony.:)
francè 15th July 2013, 08:29 AM great work Antonio :2tsup:
orificiam 15th July 2013, 08:42 AM great work Antonio :2tsup:
Thank you France', Much Appreciated.
Cheers Antonio.:)
brendan stemp 15th July 2013, 02:03 PM Great work Tony, I like em a lot
orificiam 15th July 2013, 06:09 PM Great work Tony, I like em a lot
Thanks Brendan, Very kind.
Cheers Tony.:)
smiife 15th July 2013, 08:00 PM hi tony,
well done mate they look great:2tsup:
cheers smiife:2tsup:
orificiam 15th July 2013, 08:27 PM hi tony,
well done mate they look great:2tsup:
cheers smiife:2tsup:
Thanks Smiife, Glad you like them.
Cheers Tony.:)
Rippa 15th July 2013, 08:52 PM Well done Tony I like the finish. I'm also pleased they decide to leave segmenting on this page as I would not have seen these 2 nice pieces of work.
But some people have to much free time on their hands :U:U
Rippa
orificiam 15th July 2013, 09:16 PM Well done Tony I like the finish. I'm also pleased they decide to leave segmenting on this page as I would not have seen these 2 nice pieces of work.
But some people have to much free time on their hands :U:U
Rippa
Thanks for the compliments Rippa, Yes Time on our hands:U A man as to do something in his Retirement.
Cheers Tony.:)
| |