PDA

View Full Version : Bracket or slide thingy,...ideas wanted please....







ptrott
7th September 2013, 08:55 PM
I am trying to figure out how to mount a small flat screen tv behind a backrest in a caravan.

It can either slide up & down vertically, and lock at the top of the slide,....or it can swing away from the backrest.....up.......and back to above the backrest in a 180 degree arc and lock at the top & bottom of the arc.
If the arc method is used, the screen must face the backrest at both the top & bottom of the arc. (in other words, the tv remains in the vertical plane throughout the arc)

The sliding option is preferred. The tv is 290mm high, and 450mm wide, so the vertical motion need to = or slightly exceed 300mm.

My first though was some kind of drawer runners, so I wondered if anyone who has had some experience of various drawer runners might be able to suggest a suitable one, or if there is another way of doing this reasonably easily with some proprietary bracket that swings through 180 degrees, and does not protrude very far from the mounting surface. (50mm max)

Cheers.
Phill.

RecyclingKiwi
30th January 2014, 08:28 PM
I noticed you Had a RYOBI ROUTER ERT241200 for parts and you posted here some time ago now... Did you ever get rid of it? Yeh i'm after some parts :D

Rgds
Chris

NZ

ptrott
30th January 2014, 08:43 PM
I noticed you Had a RYOBI ROUTER ERT241200 for parts and you posted here some time ago now... Did you ever get rid of it? Yeh i'm after some parts :D

Rgds
Chris

NZ

Yes, someone with the same unit took it for spares. Try a wanted in Gumtree & here. Good luck.

FenceFurniture
30th January 2014, 09:47 PM
What about making some timber runners with a pin or dowell to hold it at the "up" position?

ptrott
30th January 2014, 10:27 PM
What about making some timber runners with a pin or dowell to hold it at the "up" position?

Thanks, but that project is long ago completed.
Cheers.