Sturdee
13th December 2013, 04:39 PM
Last time I visited my Corian supplier I was able to obtain some yellow off cuts. This allowed me to make a Christmas present in the Richmond footy club colours for a mad tiger fan. :)
So I made a pen holding beaker for her. A bit more complicated then my normal turning as it required a 9 pieces of black Corian to be glued together and when cured cutting diagonal on the TS and glueing in a yellow piece for the famous yellow stripe.
Finish is sanding with Micro mesh and then buffing on my buffing lathe.
Here are some photos:
Front.
297040
Top.
297041
Bottom.
297042
and with some pens.
297043
Enjoy,
Peter.
So I made a pen holding beaker for her. A bit more complicated then my normal turning as it required a 9 pieces of black Corian to be glued together and when cured cutting diagonal on the TS and glueing in a yellow piece for the famous yellow stripe.
Finish is sanding with Micro mesh and then buffing on my buffing lathe.
Here are some photos:
Front.
297040
Top.
297041
Bottom.
297042
and with some pens.
297043
Enjoy,
Peter.