Darylako 5th January 2014, 11:41 AM Here's a wardrobe i made a while back. 1/4 scale (not 1/25th scale as some think, but full size divided by 4). Made from pine. The door and drawer latches were made from brass shelf supports and brass wire. The hinges and door latches are also brass. Thanks for looking. Daryl
crowie 7th January 2014, 04:30 PM That's a ''Ten out of Ten'' project, Daryl..very impressive..
Can hardly wait for the rest of the houses furniture....
Cheers, crowie
rwbuild 7th January 2014, 05:38 PM That's a ''Ten out of Ten'' project, Daryl..very impressive..
Can hardly wait for the rest of the houses furniture....
Cheers, crowie
only if the draws are dovetailed :rolleyes:
A Duke 7th January 2014, 06:42 PM Like your router table. :2tsup:
Regards
Darylako 8th January 2014, 09:17 PM Thanks guys. Sorry, the drawers aren't dovetailed. I clamped the router in the workmate like that to mill the flutes in the drawer fronts. It was easier to do it this way than on the table.
Here's a pic of the doll that it was made for. Daryl
Treecycle 9th January 2014, 09:36 AM Very nicely done. It looks really authentic with the doll in place.
Looking forward to some more of your work.
Dalboy 9th January 2014, 11:04 AM Having the doll in the picture really sets the wardrobe off nicely a job well done:2tsup::2tsup::2tsup:
| |