Woodcut 250mm x 40mm x 12mm x 280g CBN Wheels

[Jim Carroll]

We have finally recieved our delivery of the 250mm CBN wheels that suit the wet grind style grinders, Tormek, Scheppack, Jet or Record.

These wheels are 280g so finer than the standard wheels that come with the Wet grind machines.

One advantage with these wheels is that you do not have to redress them as they dont go out of shape like the standard wheels, so no worries about using them to sharpen your gouges then flatten to sharpen your flat tools.

Another advantage is you can set your jigs to dedicated angles and not have to reset everytime you dress the wheel

Other sizes available for spark grinders as well available in 80 and 180g

Have a look here (http://www.cws.au.com/shop/category/woodcut-cbn-grinding-wheels)

[Pat]

Mine's on it's way :U

[Pat]

My Torment with the new wheel. I had a little bit of difficulty removing the old stone, but some gentle persuasion with a lump hammer and 10mm pin punch . . .

[nosnow]

Hi
just wondering do you still need the water with These wheels

Cheers Rod

[Pat]

Rod, I put just enough to cover the bottom rim of the new wheel to aid in swarf removal. Gaffa taped a dirt big magnet to the front of the water tank to assist in collecting said swarf.

[Jim Carroll]

They are designed to run dry on spark grinders.
On the wet ones like pat says they water aids removing the swarf away

[nosnow]

Thanks for the answers

Looks like I may have to save up & buy one
Cheers Rod