Spiral Upcut Bits

[mat]

I see that Carbatec now sell the spiral upcut bits at a price beating the McJings and even have a set of three sizes at an even better price.
But what about the quality? Has anyone had any experience with the Carbatec spiral bits?

[Scally]

Mat
I bought an upcut bit from Carbatec last year, 10mm - 1/2inch shank, for about $100. It is excellent especially for mortices in hardwood.
I was interested in getting a pair of flush trim spiral bits at the price in the new catalogue.

Last week Sydney Carbatec didn't have any in stock and didn't know when new stock would arrive.
Not very helpful really.

[Gwhat]

Just to let you know, we're now selling the Whiteside Router Bits from the USA, initially we have concentrated on sets to suit our Incra range, progessively we will add to the range as an indication 3/8" x 1/2" shank up or down spiral range between $88.50 & $92.50 depending on cutting length. Availability 2 - 3 weeks.

We would appreciate some feedback as to the commonly used sizes / profiles as it is our intention to stock a reasonable range.

The complete range can be seen at http://www.whitesiderouterbits.com

Regards

Grahame The Woodpecker

[Rocker]

Just to let you know, we're now selling the Whiteside Router Bits from the USA, initially we have concentrated on sets to suit our Incra range, progessively we will add to the range as an indication 3/8" x 1/2" shank up or down spiral range between $88.50 & $92.50 depending on cutting length. Availability 2 - 3 weeks.

We would appreciate some feedback as to the commonly used sizes / profiles as it is our intention to stock a reasonable range.

The complete range can be seen at http://www.whitesiderouterbits.com

Regards

Grahame The Woodpecker

Grahame,

Carbatec are selling their 3/8" carbide spiral upcut bit with 1/2" shank diameter and 1 1/4" cutting length for $49. They are also selling a set of 1/4", 3/8" and 1/2" bits for $89 for the three. I think you will need to radically revise your pricing to compete.

Rocker

[John Saxton]

check these out for comparison http://www.woodworkforums.ubeaut.com.au/showthread.php?t=9134

5 piece sets available in up and down cut same price,tho the price may have changed since I bought mine back!
I'm really happy with the sets I purchased outta the States ..have performed up to my expectations i.e. trenching,mortises etc.

cheers :)

[Auld Bassoon]

I see that Carbatec now sell the spiral upcut bits at a price beating the McJings and even have a set of three sizes at an even better price.
But what about the quality? Has anyone had any experience with the Carbatec spiral bits?I tried to order them from CT Bris, but they were out of stock, so I'd also like to hear if they're any good.

Cheers!

[ozwinner]

I tried to order them from CT Bris, but they were out of stock, so I'd also like to hear if they're any good.

Cheers!
Theyll last for ever, seeing as how you cant use em.

Al :D

[Auld Bassoon]

Theyll last for ever, seeing as how you cant use em.

Al :DIn that case, I guess I'll have to practice making nothing, so I won't wear them out thenhttp://www.woodworkforums.ubeaut.com.au/images/icons/icon10.gif
Cheers!

[graemecarson]

I've just got my first set of Whiteside bits from Grahame the Woodpecker. Set of six bits for $195.00 and the quality is amazing. Compared to any other bit I've got they are standout. Of course the proof will be in the using but if they work half as good as they look they'll be amazing. AND... just $32.50 each.
I've paid over $100 bucks each for Oz made bits and they were pretty good. These look far better for a third of the price. And Grahame the Woodpecker is a small Aussie business with the best customer service I've ever come across - even better than Sachys Robertson - and they take some beating. This guy's trying to bring us the best quality stuff. We can all buy cheaper, but how many times do you pay $49 bucks while the $80 buck one keeps on keeping on? I think if you do your homework and look for a set that suits, you'll find you can buy real quality cheaper than the pretend stuff.

Cheers!

[Scally]

I just bought the flush trim down cut spiral bit from Carbatec in Sydney.

Ther stock had just arrived.

The spiral is very thin so I am not sure how it will handle our harwoods.

[keith53]

In that case, I guess I'll have to practice making nothing, so I won't wear them out thenhttp://www.woodworkforums.ubeaut.com.au/images/icons/icon10.gif
Cheers!
As you wish, but please do it quitely...

[render2017]

I have a couple of the whiteside bits (purchased overseas at time) and they have given great service.

There is a new kid on the Block, Northwood are now importing Infinity Bits
Look here: http://www.northwoodtools.com.au/category230_1.htm

And Dean at OnLineToolReview has comments on them here:
http://www.onlinetoolreviews.com/reviews/infinityrouterbits.htm

I have some I bought in USA and find them even better value.

Dean at OnLineToolReview tells me the owner of Infinity is the son of the original Jesada Bits owner.

For what it's worth.

[Stuart]

What's wrong with the Australian made Carb-i-tool? They have a full product range, are local manufacturers, their pricing is comparable, and their bits are top quality.

[Termite]

What's wrong with the Australian made Carb-i-tool? They have a full product range, are local manufacturers, their pricing is comparable, and their bits are top quality.
Yes, I agree. As posted elsewhere I've got quite a collection of router bits, and most of them are CMT. Now, feeling a bit guilty, I've been trying some Carbitool bits and I'm a convert, they are in my opinion every bit as good as CMT and in a lot of cases have a wider range of sizes and styles.

What prompted my change was simple, they were the only supplier who could supply a 2" straight bit that I use for cutting tennons. Cuts like the proverbial hot knife etc. :D

[Stuart]

Agreed - we are always so concerned about the sharpness of our handtools etc, and many router bits are considered a lump of tungsten we force through the wood.

Carb-i-tool's ones are all mirror finished. The juncture of 2 flat mirrored surfaces can be nothing less that razor sharp!