View Full Version : Vicmarc jaws
chuck1
23rd May 2014, 07:04 PM
Do these jaws look like vicmarc? I bought a small box of bits and I mainly wanted the faceplate. I have done some research and I think they they are for the VM120. Any help appreciated
Jim Carroll
23rd May 2014, 07:17 PM
here is the jaw sizing for the vicmarc jaws
http://www.vicmarc.com/default.asp?contentID=592
joe greiner
24th May 2014, 04:57 PM
The extra holes (besides attachment to body) seem to belong to Apprentice. Craft Supplies advise that these jaws are not interchangeable with other brands. Misfit could include both hole locations and backplane groove format.
http://www.woodturnerscatalog.com/p/100/1111/Apprentice-4-Jaw-Chuck
Cheers,
Joe
Hermit
24th May 2014, 05:24 PM
The extra holes (besides attachment to body) seem to belong to Apprentice. Craft Supplies advise that these jaws are not interchangeable with other brands. Misfit could include both hole locations and backplane groove format.
http://www.woodturnerscatalog.com/p/100/1111/Apprentice-4-Jaw-Chuck
Cheers,
Joe
While Charlie's jaws look similar to the Apprentice ones, they're not identical. The Apprentice jaws have shark/serrated teeth, whereas the ones that Charlie has are dovetail jaws.