cutting machine

[sml2010]

Hi

I am new in wood industrial.
I have a cutting machine(please see attached picture ).
320520
when i cut the wood with this machine, it make the wood dirt( black burn), please see attached picture.
320521

Does any method or material like oil can help me to cut the wood with out burned surface? i sharp the blade too but this problem is yet.

Thank you

[NCArcher]

The blade and the fence are not aligned or, it appears, square.
Do a search for setting up a table saw. Plenty of information out there.
Try searching for information on your machine. Setting up a combination machine may involve different steps than a straight table saw.
That blade is also designed for cross cutting. Not ripping.

[Master Splinter]

That also looks like a blade for aluminium, plastic or melamine faced boards, not for thick timber.

[Handyjack]

The fence next to the saw blade is probably for the jointer for which it is around the wrong way. The rip fence is sitting over the jointer blades.

[Master Splinter]

So essentially the only thing right in that picture is that the machine is correctly oriented with respect to gravity, then...

[NCArcher]

So essentially the only thing right in that picture is that the machine is correctly oriented with respect to gravity, then...

Assuming the photo is not inverted of course. :doh: