WHERE CAN I PURCHASE QUALITY PLYWOOD?

[DPB]

I am planning to build a wall mounted tool cabinet in my workshop. I have a set of plans that I downloaded from the Net which calls for 3/4" ply with a birch veneer. (The species of veneer is irrelevant, but I would like a quality veneer finish.)

In Canada, my country of origin, plywood with a range of hardwood veneer finishes were readily available at timber supply yards. This doesn't appear to be the case here in Melbourne - or am I looking in the wrong places?

Any advice will be appreciated.

DPB

------------------

[Roger Peine]

Hiya DPB.
Heres two places worth looking at.
1) Timberwood Trading/Lacey's in Brunswick.
2) Brims. In the Kilsyth area.

Should find contact details in the phone book. Both of these suppliers stock quality product, in a vast range of substrate and veneers. Of course if you want to "lay up" your own veneered substrate check these places out. Fethers and Co. in Port Melbourne and; Peter Scott-young out the back of Ringwood. Hope this helps you some.
Roj

[bobmundy]

Laceys excellent. They also stock veneer only

[Andrew Nicholls]

You may also try Marine Timbers in Mulgrave.
They stock Marine Ply as well as being the importer of some nice veneer ply.

[DPB]

Thanks for this information. I'll try these places next weekend.

DPB