Technatool Nova 3000 Drive belt

[60klix]

Can anyone tell me where I would go to get a replacement drive belt for my Nova 3000
Thank
Terry

[wheelinround]

Not sure where you are located I got one through Trend Timbers NSW.
Other wise find your self a decent belt supplier and they should be able to fit you with one.

[60klix]

Thanks Whheelinaround, I'm in Victoria in Gippsland, I'll contact Trend if I cant get anything down this way.

[Scott]

When I had the same lathe I bought mine from CBC Bearings: http://www.conbear.com/. 99% of the time they'll have to order one for you. Hope there's one near you. If you can't, try some sort of bearing supplier.

[Oldgreybeard]

345877
This is the belt on my Nova 3000.

The belt is coded "Micro - V 240j 610mm"

I would have bought it from Talair Industrial Supplies, Osborne Ave., Springvale. (03) 9546 1033.
Ask for Ian or Dean

Bob

[tore]

http://www.ebay.com.au/itm/Replacement-Fan-belt-Drive-belt-Multi-rib-240J-610mm-7-ribs-suit-treadmills-/251937714620?pt=LH_DefaultDomain_15&hash=item3aa8a871bc

Here it is:U:U
Cheers

[nalmo]

I got a replacement a few years back from Rydell in Cheltenham Vic

http://www.rydell.com.au/index.php?page=gates-ind-belts

Cost was $20 (their minimum charge). I should have bought 2 as the second would have only been a few dollars more.

[RoyG]

I bought one for my Nova 3000 back in early 2013. Carbatec (Teknatool Agents in Aust) had the belts in stock - from memory it cost me about $15.00.

[dai sensei]

Just take your old belt down to your local bearing & belt supplier, much cheaper there

[Bluegum]

Just take your old belt down to your local bearing & belt supplier, much cheaper there

Yep I think they will be. I ordered a replacement belt for my nova 1624 a while back $42 from carbatec.

[dai sensei]

Yep I think they will be. I ordered a replacement belt for my nova 1624 a while back $42 from carbatec.

Last time I needed one, I ordered from Gregory at $35 and it ended up the wrong size :~, sent it back and got the right one from the local bearing shop for $6

[jaybird]

Thanks for your replies. Carbatec in Melbourne have 1 in stock and there are 2 in Brisbane. Melbourne Carbatec is a 8 hour return trip for me so I will look at other belt suppliers closer and see what I can get.