View Full Version : Multi axis
DaveTTC
26th June 2015, 10:51 AM
Finally got some time in my own lathe.
Inspired by Theo from the Brisbane wood show this year i thought i would give it a try
http://images.tapatalk-cdn.com/15/06/25/165c4fd07f86eb5498244c36f2dd5469.jpg
It took a couple of hours
http://images.tapatalk-cdn.com/15/06/25/37a68a87659609fbfb9ae56fb82f5ecd.jpg
Maybe more lol. Was gone midnight when i went in
http://images.tapatalk-cdn.com/15/06/25/b87a76e098af482a6986924b2d1c5f49.jpg
Dave TTC
Turning Wood Into Art
dai sensei
26th June 2015, 11:55 AM
Well done mate. It must have really tested the Nova while you were swinging that piece in the lateral direction
Rod Gilbert
26th June 2015, 02:15 PM
Hi Dave,
That is impressive as Neil said must have been some serious stability issues I would imagine there was a fair bit of momentum with that one was there or did it run pretty well. :2tsup:
Regards Rod.
DaveTTC
26th June 2015, 02:35 PM
The worst thing was the lathe bouncing with the board it was bolted to. I had to turn with an elbow resting on the headstock to stabilise things.
I think the timber is blackwood. Got it from MapleMan. Turned real nice
Dave TTC
Turning Wood Into Art
turnerted
26th June 2015, 05:24 PM
Well done Dave .I was watching Theo turn that at the Sydney WWW.
Ted
smiife
26th June 2015, 07:18 PM
Hi dave,
Looks good mate :2tsup:
I was going to ask what it was but i can see it, s
an object of art :U
But i must say it kinder looks like a pregnant women
with a big head,
Well done you should sell it for thousands in one of
those trendy arty shops in sydney:U
DaveTTC
27th June 2015, 12:04 AM
Apparently it is meant to be a seal balancing a ball but i have had others say a woman with big ..... chest? Im sure you get the idea.
I will over time play around with some variations of the shape till i get something I really like.
Dave TTC
Turning Wood Into Art
Sawdust Maker
27th June 2015, 12:30 AM
'Dance of the 7 veils' with ball
Dalboy
27th June 2015, 03:40 AM
I don't care what you call it from here it looks pretty good come to think about it more like fantastic. :2tsup::2tsup::2tsup:
There are so many different things that can be done on a lathe and if many on here are like me they have a to do list as long as their arms and this is one to try. If it looks half as good as yours I will be a proud man.
DaveTTC
27th June 2015, 11:20 AM
Turns out the wood must have been on the green side.
It was sat on the floor for a four hour trip with the hrater blowing on it ..... not good lol.
It has now developed some more 'character'
Thanks for the comments all. If i can get the video of my phone app I will share thia later too
Dave TTC
Turning Wood Into Art
Simplicity
27th June 2015, 11:51 AM
Dave ,
Is that a new drying technology?
The car road trip, please share it with us .
I do quite a few hours driving each week .
And can fit in a 2.4 metre length of timber in the back of my van.
I'm seeing a whole new revenue venture [emoji12][emoji12][emoji12]
Or am I becoming a capitalist pig [emoji20][emoji20][emoji20]
DaveTTC
27th June 2015, 11:54 AM
I reckon with a van full of windows you can park it in the sun and even use it like a solar kiln.
Just learn from my mistake, seal the ends and sticker your wood lol
How do you sticker a single item
;)
Dave TTC
Turning Wood Into Art
Mobyturns
27th June 2015, 12:35 PM
Nice work Dave. I haven't watched Theo turn these at Turnfest so I should make the effort to see his demo.
Skew ChiDAMN!!
27th June 2015, 01:28 PM
Looks good!
The worst thing was the lathe bouncing with the board it was bolted to. I had to turn with an elbow resting on the headstock to stabilise things.
Hmm... I wonder if you could turn two of them simultaneously, like Julio Marcelongo's(sp?) 'seaweed spurts?' Probably not, but I might have to have a go... ;)
DaveTTC
27th June 2015, 01:59 PM
Looks good!
Hmm... I wonder if you could turn two of them simultaneously, like Julio Marcelongo's(sp?) 'seaweed spurts?' Probably not, but I might have to have a go... ;)
Two simultaneously ..... . . Id like to see that. Got a link?
Dave TTC
Turning Wood Into Art
Rod Gilbert
27th June 2015, 08:34 PM
Maybe it's the patternmaker in me but have you just made a new crankshaft for the van.:D
Regards Rod.
DaveTTC
27th June 2015, 08:38 PM
Actually I would like to do a crank shaft. Send me the specs and I'll turn one up
Dave TTC
Turning Wood Into Art
Dalboy
27th June 2015, 10:05 PM
Actually I would like to do a crank shaft. Send me the specs and I'll turn one up
Dave TTC
Turning Wood Into Art
Will the rest of the engine follow:woot:
DaveTTC
27th June 2015, 10:45 PM
Will the rest of the engine follow:woot:
Had talked to Repliconics about that posibility
Dave TTC
Turning Wood Into Art
Rod Gilbert
27th June 2015, 10:57 PM
It's all been done before no matter what it starts with the patten and as a pattern maker that is what you have to produce. Actually it starts with the drawing and goes from there.
Regards Rod.