PDA

View Full Version : Posts...



david.elliott
24th July 2015, 04:33 PM
Look like I have another kitchen coming up to do..
The design calls for 5 turned posts, 1 at 2400ish and 4 at 900mm and around 100mm square at the foot and head.

Any interest? will be painted so nothing flash required timber wise.

David

chuck1
24th July 2015, 07:51 PM
I'm to far away. I think.

Willy Nelson
25th July 2015, 01:18 AM
Look like I have another kitchen coming up to do..
The design calls for 5 turned posts, 1 at 2400ish and 4 at 900mm and around 100mm square at the foot and head.

Any interest? will be painted so nothing flash required timber wise.

David

Hey Mate, I am a little closer, in Port Kennedy. The 900's shouldn't be too hard, but the 2400 is too long for my lathe, Are you supplying timber?
Willy
Jarrahland

Mobyturns
25th July 2015, 09:23 AM
Look like I have another kitchen coming up to do..
The design calls for 5 turned posts, 1 at 2400ish and 4 at 900mm and around 100mm square at the foot and head.

Any interest? will be painted so nothing flash required timber wise.

David


Look up Kevin Luff in Perth.