View Full Version : Oil burner
phaser
22nd August 2015, 05:52 PM
Hi all, Looking for info about making an oil burner for melting aluminium
GuzziJohn
24th August 2015, 09:40 PM
Hi all, Looking for info about making an oil burner for melting aluminium
Have a look at the alloyavenue website. Here's the link to the burner forum.
http://www.alloyavenue.com/vb/forumdisplay.php?18-Burner-engineering
Lots of info here
Ueee
26th August 2015, 01:16 AM
I have an oil burner but never used it, it's from an old boiler. For ally though gas is more than enough and far easier to setup. If your in it for the challenge though, making an oil burner would be interesting.
Vernonv
26th August 2015, 11:10 AM
I have an oil burner but never used it, it's from an old boiler.I had a burner from an old central heating system, but found it unsuitable for use in a furnace, as it was designed to heat a bigger area and the confined space of a furnace just choked it.
DSEL74
26th August 2015, 11:55 AM
Can you use a 9kg gas bottle gas forge and turn it upright to melt Alu for casting?