Reno RSS Feed
26th August 2015, 02:10 PM
Hi after some advice about building a large 16 seat table
the dimensions of the apron are:
3.5m x 1.1m
making it entirely (apron and top) out of a hardwood called Palawan wood side is:
140mm x 25mm
It seems sturdy just as apron/frame so I'm worried about it sagging over time. So going to put 3 boards of the same material along the short axis as I'll need something to screw the top boards to
will that be enough to stop it sagging or can I screw something on the long sides like a piece of 3 or 4mm steel plate to try and stiffens it
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/f85/really-large-table-bracing-116867/)
the dimensions of the apron are:
3.5m x 1.1m
making it entirely (apron and top) out of a hardwood called Palawan wood side is:
140mm x 25mm
It seems sturdy just as apron/frame so I'm worried about it sagging over time. So going to put 3 boards of the same material along the short axis as I'll need something to screw the top boards to
will that be enough to stop it sagging or can I screw something on the long sides like a piece of 3 or 4mm steel plate to try and stiffens it
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/f85/really-large-table-bracing-116867/)