Rillawolf 11th December 2015, 09:50 AM Hi all, wondering if any locals can help me. I'm looking for a supplier of Baltic Birch ply anywhere in Bris (although southside is good) for my scroll saw work.
Also other softwood ply B grade minimum. I use watercolours and clear stain so need a decent face.
Thanks very much
Sandy
Ian Smith 11th December 2015, 09:54 AM Sandy,
Try Mr Ply - Plywood suppliers – huge range of plywood products, MDF & wood panels (http://www.misterplywood.com.au/)
Ian
Rillawolf 11th December 2015, 10:36 AM Thanks Ian, have been there, no luck with decent stuff.
Ian Smith 11th December 2015, 10:48 AM Sandy,
Depending on what size and thickness you are after some of the better hooby stores may have what you want.
Try Budget Hobbies at Capalaba - Budget Hobbies > Home (http://budgethobbies.com.au/)
or Small Parts and Bearings also at Capalaba - just a bit pricey - Small Parts And Bearings (http://www.smallparts.com.au/)
Ian
Rillawolf 11th December 2015, 10:58 AM Cheers Ian :) I should have said, looking for larger 2400 x 1200 sheets, 6mm +
Thanks for taking the time to help me.
Marwood 13th December 2015, 07:55 AM Revolution Wood Panels (http://www.revolutionwoodpanels.com.au/) in Brendale.
Pittwater Pete 13th December 2015, 08:10 AM Hi Rillawolf
You can get great quality Birch Plywood in many thicknesses from DMK Forest Products. Here is a link to their Birch Plywood page.
DMK Forest Products | Birch Plywood | Birch Ply Wood (http://dmkforestproducts.com.au/wisa-birch/)
They have a branch in Brisbane, Sydney and Burleigh Heads.
I've used their products, including the Birch Plywood, for over 30 years without issue. Great team of people to boot. I can highly recommend them.
Here is a link to their website.
DMK Forest Products | Contact (http://dmkforestproducts.com.au/contact/)
Regards
Pete.
Rillawolf 13th December 2015, 12:33 PM Thanks Marwood and Pete.
Have been reluctant to contact distributors as I've always figured there'd be a large minimum order rather than just a few sheets.
Will look a little more into both and I guess an enquiry won't hurt :)
Cheers,
Sandy
Pittwater Pete 13th December 2015, 01:08 PM Thanks Marwood and Pete.
Have been reluctant to contact distributors as I've always figured there'd be a large minimum order rather than just a few sheets.
Will look a little more into both and I guess an enquiry won't hurt :)
Cheers,
Sandy
DMK will sell you 1 sheet if that's all you want.
Pete.
| |