woodman12
28th February 2016, 11:08 AM
used 1/2 grey corian sink cut outs to make 2 vac clamps for joining solid surface pieces
just apply the pucks at the joint and use 2 clamps to pull in on the glue joint
takes a small vac pump 1/3 hp running at -18.The puck is flexible and 2 sizes of vac o rings can be used
https://youtu.be/ATDIdOZow1g
just apply the pucks at the joint and use 2 clamps to pull in on the glue joint
takes a small vac pump 1/3 hp running at -18.The puck is flexible and 2 sizes of vac o rings can be used
https://youtu.be/ATDIdOZow1g