Deyve
23rd March 2016, 09:14 AM
Not sure if this is the right forum as is my first post but here goes.
Just purchased a table saw/planer in reasonable condition.
On the dust bag is only identification -EzycutGilpro.
Have searched the net but cannot find any information - can anybody help.
Regards
Dave A
Chesand
23rd March 2016, 09:45 AM
Hi Dave
Welcome aboard a very helpful forum.
There have been 2 or 3 threads about Gilbro machines so a search on here should yield some info. There was a thread in just the last couple of weeks. MalB has put up some useful info in recent times.
Fuzzie
23rd March 2016, 09:50 AM
Welcome to the forums Dave. Ezycut used to be a manufacturer in Mordialloc. As far as I know they made lapidary equipment as well as woodworking stuff. There are a few ezycut threads on the forum if you search or look at the similar threads links at the bottom of this threads page.
There is currently an ezycut lapidary catalogue listed on ebay. (http://www.ebay.com/itm/LITTLE-JEWEL-LAPIDARY-EQUIPMENT-BY-EZYCUT-CATALOGUE/291714849919?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D36188%26meid%3Df292ed13e94e45548296e4d4c5320364%26pid%3D100011%26rk%3D1%26rkt%3D1%26sd%3D291656010946)
Cheers, Franklin
Deyve
24th March 2016, 08:51 AM
Thanks heaps.