kenny_10
9th January 2017, 09:47 PM
I have a Skil 297 router that requires two parts.
firstly a collet.. the one that came with it (1/4") is in two pieces !!.. these are the older cone type with a slot up the side.
This part is unavailable in Australia, and appears there is no collet that is interchangeable..
The other part is the spring that operates the shaft locking lever.. i should be able to make one if i can see what it looks like.
Cheers .. Ken
firstly a collet.. the one that came with it (1/4") is in two pieces !!.. these are the older cone type with a slot up the side.
This part is unavailable in Australia, and appears there is no collet that is interchangeable..
The other part is the spring that operates the shaft locking lever.. i should be able to make one if i can see what it looks like.
Cheers .. Ken