artme
10th May 2017, 08:16 PM
I have an old Teknatool 122 lathe - the oone with two pipes as a bed.
Does any forumite have this, or the TL1500 model?? I need an exploded diagram of the whole kit and kaboodle .
I took it apart for storage about three years ago and am having trouble remembering exactly how it goes back together.:doh::B
I have three identical plates with hex holes. One holds the toolpost, one holds the taistock. Can't see where the third one goes!
Second problem is the quill is stuck in the tailstock, obviously because of rust. Can I heat this to release the quill??
Many thanks in advance, artme.
Does any forumite have this, or the TL1500 model?? I need an exploded diagram of the whole kit and kaboodle .
I took it apart for storage about three years ago and am having trouble remembering exactly how it goes back together.:doh::B
I have three identical plates with hex holes. One holds the toolpost, one holds the taistock. Can't see where the third one goes!
Second problem is the quill is stuck in the tailstock, obviously because of rust. Can I heat this to release the quill??
Many thanks in advance, artme.