View Full Version : Wanted (NSW) Hyco bandsaw parts
bunya pine
16th August 2017, 05:37 PM
Team
I'm after a ripping fence rail, screws and spacers as denoted in the photo. Does anyone have any spares out there that they can part with?
https://uploads.tapatalk-cdn.com/20170816/e883d0b8e54129d7b1b3eb13e9f1db4a.jpg
Please let me know.
Cheers stew
DSEL74
17th August 2017, 11:57 AM
It's just a flat steel bar and some round rod with holes for the spacers isn't it? Should be easy enough to make a as factory copy if you can't find one.
Which size saw is it?
bunya pine
17th August 2017, 11:59 AM
I agree, but if some one had a spare laying around, I see no use in wasting it ;)
3RU
21st August 2017, 02:34 PM
This is how its done
bunya pine
21st August 2017, 02:37 PM
This is how you do it
3RU
That looks very cool! Looks very accurate ! You don't happen to have the old fence parts ? [emoji12]
Cheers stew
3RU
21st August 2017, 03:05 PM
No old parts. That's why I added the fence. Purchased at a WWW show some years back. Not expensive as I recall.
3RU
21st August 2017, 09:26 PM
Hi Stew,
There is a fair bit of HYCO stuff here like this - http://www.woodworkforums.com/f299/age-hyco-bandsaw-197436 and I found the rail per yours pretty common including commentary from DSEL74.
Here is the complete guide which is makeable. I still think mine is best bang for buck but understand that depends on your hourly rate.