Sherwood MC-1100 drive belt

[Woiim]

Can any one tell me what size and type the belt is on a Sherwood MC-1100 lathe. Manual is no help at all.
Thanks

[Paul39]

If the belt is broken, take it to a hardware store or motor repair shop and ask for "one of these". If it is a flat Poly V - belt, you may have to order from a seller of Sherwood lathes.

V - Belt: https://cdn3.volusion.com/nfczr.pzckq/v/vspfiles/photos/BX59-2.jpg?1500476265

Flat Poly V - Belt http://bhagyodaybelt.com/wp-content/uploads/2014/12/Polly-V-Belt-.jpg

[Woiim]

If the belt is broken, take it to a hardware store or motor repair shop and ask for "one of these". If it is a flat Poly V - belt, you may have to order from a seller of Sherwood lathes.

V - Belt: https://cdn3.volusion.com/nfczr.pzckq/v/vspfiles/photos/BX59-2.jpg?1500476265

Flat Poly V - Belt http://bhagyodaybelt.com/wp-content/uploads/2014/12/Polly-V-Belt-.jpg

Thanks Paul but I was just after the size to be able to buy a spare to have in case it broke on me.

[Treecycle]

Are you able to post any photos of the belt and pulleys?
Are there any markings on the original belt?
Looking at a generic parts list for an MC1100 lathe it says the belt is a 625 but they come in various widths so need to know the width even if the length is right.