pollypipe expansion and contraction irigation; methods to stop snaking

[glenn k]

I have 57m mounds with 2 runs of 13mm poly drip line on top. I made wire clips to hold them parallel but they still snake with expansion and contraction. I do not want to bury them. I calculated there could be 600 change in length.
I was thinking of a spring on the free end probably about 50Kg pull at 600mm. Any ideas where to get springs or a better idea?

[woodPixel]

Its a PITA. I used a spring attached to the fence with wire to hold it in place. Until this year it held well, but they will modified with a twist-tension thing on one end.

Ive found the Hippo Clips to be very good. I ws exploding pipe ends all the time.

Tool: Hippo Clamping Tool 101HIPTOOL | eBay (http://www.ebay.com.au/itm/Hippo-Clamping-Tool-101HIPTOOL/252660126779)
And clips (choose the right size) Hippo Clamp 25mm LDPE 27-28mm RED 101HIP27 (Pack of 50) | eBay (http://www.ebay.com.au/itm/Hippo-Clamp-25mm-LDPE-27-28mm-RED-101HIP27-Pack-of-50/262741242896)

[Harry72]

Are you rolling it out or pulling it off the roll in a huge spiraling mess, and are you stretching it out in the full sun to make it straight in the first place?
I use a ratchet strap at each end and put some tension on it for a half hour or so works a treat... even on 50mm blue line:) I use my utes tow ball and a star dropper for anchors