Jock_Jock
30th June 2002, 08:30 PM
I have just purchased the planer attachment to fit to my triton 2000. I have a B&D professional planer and i'm having trouble fitting the handle bracket. Because the fence mounting holes are about 55 mm from the front of the planer it sits right up at the end of the assembly. This means that the rear clamp position only just allows the clamp to contact the handle.
The Handle bracket cant fit into the slots on the main assembly and allow enough room to fit the handle clamp behind it.
It appears I will have to relocate the handle bracket further towards the front of the assembly by drilling some extra holes. Will this weaken the assembly or is there some alternative. I want to explore the options before I return the attachment as I can't afford to buy another planer.
Thanks
The Handle bracket cant fit into the slots on the main assembly and allow enough room to fit the handle clamp behind it.
It appears I will have to relocate the handle bracket further towards the front of the assembly by drilling some extra holes. Will this weaken the assembly or is there some alternative. I want to explore the options before I return the attachment as I can't afford to buy another planer.
Thanks