powderpost
15th March 2018, 12:30 PM
For a number of reasons I haven't done a lot of turning of late. One reason was that I have just finished insulating the shed and have finally got it back into some semblance of "order", by my standard any way. The last two summers were a bit of a struggle. Mind you that has nothing to do with my dob.. :no:.
431812431813431814
That lidded box measures 65mm x 50mm diameter and is made from black bean and silver ash. It has a mother of pearl insert on the top. The thread was hand chased on a thin insert of dead finish. The top and bottom is black bean. The finish is Aussie Oil.
431815431816
This simple little bowl is made from local grown camphor laurel. The local stuff generally has very little colour in it. It measures 180mm diameter x 55mm deep. The banding is my own manufacture. Finished with sanding sealer and two sprayed coats of lacquer.
Jim
431812431813431814
That lidded box measures 65mm x 50mm diameter and is made from black bean and silver ash. It has a mother of pearl insert on the top. The thread was hand chased on a thin insert of dead finish. The top and bottom is black bean. The finish is Aussie Oil.
431815431816
This simple little bowl is made from local grown camphor laurel. The local stuff generally has very little colour in it. It measures 180mm diameter x 55mm deep. The banding is my own manufacture. Finished with sanding sealer and two sprayed coats of lacquer.
Jim