Commission ....

[DaveTTC]

Nothing too exciting except that yes finally some forced time on the lathe. This job has been sitting on the back burner waiting to be trust forward and at last it is here.

It is the clients design. A copy of an old table. I think the legs arw 120 x 120 stock about 420 long

https://uploads.tapatalk-cdn.com/20180402/7f80eb0a9fd543ab4feabcb5486e393b.jpg

With one held on the out riggers it aerves an easy refference for the next

https://uploads.tapatalk-cdn.com/20180402/be17aea72f3f00d1b8ce6b193e38e3ed.jpg

And ready to rough down

https://uploads.tapatalk-cdn.com/20180402/d1c6314a686ece747c5c299f2d800bdc.jpg

I hope to get this job finished tonight

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[DaveTTC]

What I did like .... a little mistake that showed how stable the Laguna is. I stood leg 2 on the tailstock outrigger to check it out and then proceeded to syart leg 3 withouy putting 2 somewhere safe

https://uploads.tapatalk-cdn.com/20180403/c9a7f7abcd7fe26663a63bdd9aba3ba4.jpg

As you can see it remained standing. Good thing that as client provided the timber and there is no spare

https://uploads.tapatalk-cdn.com/20180403/fbbaab498cb62ed6f04c73d4355d9d85.jpg

Three down amd the last one to finish tonight

https://uploads.tapatalk-cdn.com/20180403/0449058d2dd12cab19a44a1da7606e40.jpg

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[Optimark]

With one held on the out riggers it aerves an easy refference for the next

Dave, officially, it is a "Comparator" :D

https://www.woodcraft.com/products/laguna-tools-comparator-for-revo-1836

Mick.

[DaveTTC]

With one held on the out riggers it aerves an easy refference for the next

Dave, officially, it is a "Comparator" :D

https://www.woodcraft.com/products/laguna-tools-comparator-for-revo-1836

Mick.

Thanks Mick for the clarification. Had numerous discussions with people as to what purpose it seved. Some said for hanging a screen on

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[crowie]

G'Day Dave, what sort of time is involved in doing each leg for a master turner as yourself?? Cheers, Peter

[smiife]

Hi dave , good job mate , well done , good to see your doing a bit of night work:U

[DaveTTC]

G'Day Dave, what sort of time is involved in doing each leg for a master turner as yourself?? Cheers, PeterNot sure about a master ... embarrassingly the first one took me about 2 hours. I had a bad picture and no measurements to go from.

The last one was a mkre respectable 20 minutes
Hi dave , good job mate , well done , good to see your doing a bit of night work:UThank you. Amazing how rusty you get when you dont go on for a while. Was good getting on there. Must do it more often

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[Simplicity]

Mr David
Who's Design for the legs yours or the clients.

Cheers Matt


Sent from my iPhone using Tapatalk

[DaveTTC]

Mr David
Who's Design for the legs yours or the clients.

Cheers Matt


Sent from my iPhone using TapatalkHis design. Based on a poor quality photo

https://uploads.tapatalk-cdn.com/20180403/40d59cb044d697ca638e390ff7081cb0.jpg

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[Simplicity]

I also see your back on the sauce [emoji849]


Sent from my iPhone using Tapatalk

[DaveTTC]

Advice on longer legs

short leg on long leg. Will increase corbal end to where pic is taken.

https://uploads.tapatalk-cdn.com/20180404/3cf68abfc83951a2a3c7699b1293cbaa.jpg

Thinking flip on tripple bead then at corbal introduce foot. Foot maybe slightly elongated.

Thoughts?





DaveTTC
The Turning Cowboy
Turning Wood Into Art

[DaveTTC]

Now the big legs. Haf to come up with something chunky based on the coffee table legs but this time for a dining table. Most of this mess is from the first 4. Just started roughing down the first of the dining legs

https://uploads.tapatalk-cdn.com/20180405/2f94d8a04b4e08401ac27dff35c82ede.jpg

Square to round in progress



https://uploads.tapatalk-cdn.com/20180405/45e7c8f7c202c606f2716e2eaf80d1ae.jpg

Mark out the detaile

https://uploads.tapatalk-cdn.com/20180405/9072cf25d4915e38ac45a9420eac47a5.jpg

Starting to take shape

https://uploads.tapatalk-cdn.com/20180405/08efa5be2d80ed0768c38e870289c30f.jpg

And a comparison big to small

https://uploads.tapatalk-cdn.com/20180405/e16fdb81c6e8512a27260e40896cb58b.jpg

Tomorrow after work I hope to get the last three done.


DaveTTC
The Turning Cowboy
Turning Wood Into Art

[Simplicity]

If you have time tomorrow can you show us going from round to square please.


Sent from my iPhone using Tapatalk

[Optimark]

I can't help but feel that the smaller legs are a bit on the heavy side for their length, one could assume the coffee cups may be 20 litre units, or possibly the table has a set of Encyclopedia Britanica and all yearly additional editions on top. Whichever is the reason, it certainly will be able to hold kids doing their thing when big people aren't around.

Mick.

[DaveTTC]

I can't help but feel that the smaller legs are a bit on the heavy side for their length, one could assume the coffee cups may be 20 litre units, or possibly the table has a set of Encyclopedia Britanica and all yearly additional editions on top. Whichever is the reason, it certainly will be able to hold kids doing their thing when big people aren't around.

Mick.Yes I ageee. Very very chunky. That is what he wanted. Not what I would choose or suggest but he likes it

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[Dalboy]

If the customer is happy then good news all round great job on the turning

[Simplicity]

WHS[emoji115]


Sent from my iPhone using Tapatalk

[rwbuild]

WTS :2tsup: