Lumsden grinder

[MWF FEED]

G/day all, I was at my BIL's factory a couple of weeks ago and took some pic's of one of his grinders that he pulled down to replace the grinding head spindle bearings. That bit swinging off the crane weighs about 5 ton.
This is the 5 foot grinder, he also has 3 x 4 foot and an 8 ft. If anyone is interested I can upload some more pic's.
He can get the brgs at a good price and as of this post only has the price for the smaller top brg, $2300
Lucky that moolah is coming outta his pocket and not mine :D


cheers, shed
Attached Images

http://metalworkforums.com/images/attach/jpg.gif 1 bridge.JPG (http://metalworkforums.com/attachment.php?attachmentid=373500&d=1527647357) (126.9 KB)
http://metalworkforums.com/images/attach/jpg.gif 2.JPG (http://metalworkforums.com/attachment.php?attachmentid=373490&d=1527647238) (152.5 KB)
http://metalworkforums.com/images/attach/jpg.gif 3 base and mag chuck.JPG (http://metalworkforums.com/attachment.php?attachmentid=373491&d=1527647238) (61.3 KB)
http://metalworkforums.com/images/attach/jpg.gif 4 grinding head.JPG (http://metalworkforums.com/attachment.php?attachmentid=373492&d=1527647238) (160.8 KB)
http://metalworkforums.com/images/attach/jpg.gif 5 grinding head drive shaft.JPG (http://metalworkforums.com/attachment.php?attachmentid=373493&d=1527647238) (176.8 KB)
http://metalworkforums.com/images/attach/jpg.gif 6 grinding head motor about 100 hp.JPG (http://metalworkforums.com/attachment.php?attachmentid=373494&d=1527647238) (194.4 KB)
http://metalworkforums.com/images/attach/jpg.gif 7 magnetic separator.JPG (http://metalworkforums.com/attachment.php?attachmentid=373495&d=1527647238) (170.3 KB)
http://metalworkforums.com/images/attach/jpg.gif 8 grinding head spindle.JPG (http://metalworkforums.com/attachment.php?attachmentid=373496&d=1527647238) (56.5 KB)
http://metalworkforums.com/images/attach/jpg.gif 9 brg preload springs.JPG (http://metalworkforums.com/attachment.php?attachmentid=373497&d=1527647238) (100.5 KB)
http://metalworkforums.com/images/attach/jpg.gif 10 brg preload springs and retaining disc.JPG (http://metalworkforums.com/attachment.php?attachmentid=373498&d=1527647238) (80.5 KB)
http://metalworkforums.com/images/attach/jpg.gif 11 old brgs cleaned up.JPG (http://metalworkforums.com/attachment.php?attachmentid=373499&d=1527647238) (85.4 KB)




Read the full thread at metalworkforums.com... (http://metalworkforums.com/showthread.php?t=201881&goto=newpost)