Help needed

[Fumbler]

does anyone out there have a milling machine that can pop a few holes in a piece of 25mm wide x 10mm thick aluminium flat bar? I'll throw in a case of beer as an appetiser.

i don't have the capability to drill and tap these holes. They need to be drilled spaced and drilled in Aline accurately. I can send the correct taps for the job, boomerang of course.

if no one can help can they point me to an engineering firm near Artarmon, NSW, that can do it relatively cheaply.

thanks in advance

Richard

[Colin62]

You’ll probably have a better chance if you ask in the metalwork forum.

Metal Work Forums (http://metalworkforums.com/)

[Fumbler]

I was going to but there is no "Post new thread" button for me to be able to post. And there I was all excited that someone had replied straight away. Thanks.