MWF FEED
6th July 2018, 10:00 PM
Hi all,
Forever on the sniff for the next next (next) project - I first saw this about 2 years ago and saw it again recently still sitting there. I am considering buying it. Polite ask: if you know where it is please don't shout it out here. :-)
My horizontal mill knowledge it pretty light so I am after some of your observations and comments about this unit. It has no makers mark that I could see, just a McPhersons importers badge:
IMAG0093.jpg (http://metalworkforums.com/attachment.php?attachmentid=374090&d=1530873965)IMAG0094.jpg (http://metalworkforums.com/attachment.php?attachmentid=374091&d=1530874043)IMAG0095.jpg (http://metalworkforums.com/attachment.php?attachmentid=374092&d=1530874182)IMG_20180705_155622.jpg (http://metalworkforums.com/attachment.php?attachmentid=374093&d=1530874240)IMG_20180705_154756.jpg (http://metalworkforums.com/attachment.php?attachmentid=374094&d=1530874277)
Some things I do get:
* the table swivels - nice.
* the table is driven. Also nice.
* it has no motor so will need something made to run it.
* it has no arbor - I've no idea what taper or whatever suits it.
Some things I don't get:
* man that table is a long way from the spindle - can the table really go all the way up there?
* the arbor 'over arm' has two 'eyes' either side of the arbor hole - what are they for?
Please offer any comments or observations you may have - you know more than I do! :-)
Thoughts?
Greg.
Attached Images
http://metalworkforums.com/images/attach/jpg.gif IMG_20180705_154756.jpg (http://metalworkforums.com/attachment.php?attachmentid=374094&d=1530874277) (259.6 KB)
http://metalworkforums.com/images/attach/jpg.gif IMAG0094.jpg (http://metalworkforums.com/attachment.php?attachmentid=374091&d=1530874043) (253.0 KB)
http://metalworkforums.com/images/attach/jpg.gif IMAG0095.jpg (http://metalworkforums.com/attachment.php?attachmentid=374092&d=1530874182) (252.7 KB)
http://metalworkforums.com/images/attach/jpg.gif IMG_20180705_155622.jpg (http://metalworkforums.com/attachment.php?attachmentid=374093&d=1530874240) (233.8 KB)
http://metalworkforums.com/images/attach/jpg.gif IMAG0093.jpg (http://metalworkforums.com/attachment.php?attachmentid=374090&d=1530873965) (260.1 KB)
Read the full thread at metalworkforums.com... (http://metalworkforums.com/showthread.php?t=202024&goto=newpost)
Forever on the sniff for the next next (next) project - I first saw this about 2 years ago and saw it again recently still sitting there. I am considering buying it. Polite ask: if you know where it is please don't shout it out here. :-)
My horizontal mill knowledge it pretty light so I am after some of your observations and comments about this unit. It has no makers mark that I could see, just a McPhersons importers badge:
IMAG0093.jpg (http://metalworkforums.com/attachment.php?attachmentid=374090&d=1530873965)IMAG0094.jpg (http://metalworkforums.com/attachment.php?attachmentid=374091&d=1530874043)IMAG0095.jpg (http://metalworkforums.com/attachment.php?attachmentid=374092&d=1530874182)IMG_20180705_155622.jpg (http://metalworkforums.com/attachment.php?attachmentid=374093&d=1530874240)IMG_20180705_154756.jpg (http://metalworkforums.com/attachment.php?attachmentid=374094&d=1530874277)
Some things I do get:
* the table swivels - nice.
* the table is driven. Also nice.
* it has no motor so will need something made to run it.
* it has no arbor - I've no idea what taper or whatever suits it.
Some things I don't get:
* man that table is a long way from the spindle - can the table really go all the way up there?
* the arbor 'over arm' has two 'eyes' either side of the arbor hole - what are they for?
Please offer any comments or observations you may have - you know more than I do! :-)
Thoughts?
Greg.
Attached Images
http://metalworkforums.com/images/attach/jpg.gif IMG_20180705_154756.jpg (http://metalworkforums.com/attachment.php?attachmentid=374094&d=1530874277) (259.6 KB)
http://metalworkforums.com/images/attach/jpg.gif IMAG0094.jpg (http://metalworkforums.com/attachment.php?attachmentid=374091&d=1530874043) (253.0 KB)
http://metalworkforums.com/images/attach/jpg.gif IMAG0095.jpg (http://metalworkforums.com/attachment.php?attachmentid=374092&d=1530874182) (252.7 KB)
http://metalworkforums.com/images/attach/jpg.gif IMG_20180705_155622.jpg (http://metalworkforums.com/attachment.php?attachmentid=374093&d=1530874240) (233.8 KB)
http://metalworkforums.com/images/attach/jpg.gif IMAG0093.jpg (http://metalworkforums.com/attachment.php?attachmentid=374090&d=1530873965) (260.1 KB)
Read the full thread at metalworkforums.com... (http://metalworkforums.com/showthread.php?t=202024&goto=newpost)