Chris Parks
2nd October 2018, 01:04 PM
I am putting this here for future reference for anyone who finds it necessary to adjust the tables on one of these machines
a331 - adjustment guide | Felder Upload (http://upload.felcom.at/file/1538407927_a331-adjustmentguide)
This document would also apply to a C3 combination machine.
Enfield Guy
4th October 2018, 08:44 PM
So you have had to do this recently? Did you have an adequate straight edge?
i had to do my little old school jointer the other day after belting the bejesus out of the outfeed with a lump of stick. Luckily I had, some years ago acquired a 2metre straight edge that is straight to 34 microns over its length.
cheers
B
Chris Parks
5th October 2018, 12:04 AM
No, I have never had any issues with mine. As far as I know this document was put together by Felder US and it only surfaced after a new customer had problems with their just purchased machine. Prior to that there was only some minor technical measurements with no real explanation of how to adjust the machine to get those figures.