coolibah burl bowl

[smiife]

Hi guys , have been working on a different finish and colour
for this coolibah burl bowl
Any comments and advice welcome !

[tony_A]

That has turned out very nicely smiife, you would have to be pleased with that. I'm generally not a big fan of painted turnings but this one works for me. Well done.
Would have liked a photo of the underneath.

Tony

[smiife]

[QUOTE=tony_A;211505that has turned out very nicely smiife,you would have to be pleased with that. I'm generally not a big fan of painted turnings but this one works for me. Well done.
Would have liked a photo of the underneath.

Tony[/QUOTE]

Hi Tony , I don, t normally do colour on burls , but I think It works
on this one , photo no.4 is the bottom of the bowl
Thanks for your comments

[brainstrust]

As the others said, much prefer the wood but this one is very very nice indeed......the more I look at it.......it's fantasmo, well done :2tsup:

[tony_A]

photo no.4 is the bottom of the bowl


Thanks for pointing that out, how did I missed that.

[smiife]

As the others said, much prefer the wood but this one is very very nice indeed......the more I look at it.......it's fantasmo, well done :2tsup:

Thanks Brainstrust , appreciate your comments :2tsup:


Thanks for pointing that out, how did I missed that.

Hi Tony , no problem mate , :2tsup:

[smiife]

I have just noticed that photos 5&6 have a smiley face on them :U
The bowl is about 300mm x100mm , the rim was done with spirit
stain and about 10 coats of N.C laquer , then when dry sanded with
wet and dry to 2000grit , and polished with cut and polish normally used
on the car ..
Thanks again for comments and views :2tsup:

[mick661]

Nice work

[smiife]

Nice work


Thanks Mick , :2tsup::2tsup::2tsup: