MWF FEED
2nd April 2019, 05:50 PM
I have recently purchased a Parkanson power hacksaw and need to find some information for it. It currently does not move and this is possibly due to the rust built up on it from not being used. I want to be able to pull it all apart and rebuild/recondition but would like to find a service manual or repair manual for it as I have no experience with these.
Model 131272
Serial 2127
It has a date tag on it stamped 3/3/27 so it appears to be an oldie!
DSCN4087.JPG (http://metalworkforums.com/attachment.php?attachmentid=378650&d=1554186689)
At this time I do not really understand how these work. I cannot lift up the blade which may be due to rust or it may be due to there being hydraulics that require the motor to be running. I can see a coolant pump connected to the main motor.
Any help would be appreciated.
Attached Images
http://metalworkforums.com/images/attach/jpg.gif DSCN4087.JPG (http://metalworkforums.com/attachment.php?attachmentid=378650&d=1554186689) (59.8 KB)
Read the full thread at metalworkforums.com... (http://metalworkforums.com/showthread.php?t=203122&goto=newpost)
Model 131272
Serial 2127
It has a date tag on it stamped 3/3/27 so it appears to be an oldie!
DSCN4087.JPG (http://metalworkforums.com/attachment.php?attachmentid=378650&d=1554186689)
At this time I do not really understand how these work. I cannot lift up the blade which may be due to rust or it may be due to there being hydraulics that require the motor to be running. I can see a coolant pump connected to the main motor.
Any help would be appreciated.
Attached Images
http://metalworkforums.com/images/attach/jpg.gif DSCN4087.JPG (http://metalworkforums.com/attachment.php?attachmentid=378650&d=1554186689) (59.8 KB)
Read the full thread at metalworkforums.com... (http://metalworkforums.com/showthread.php?t=203122&goto=newpost)