View Full Version : Symantec 1800
Gemvale
24th June 2019, 10:02 PM
Can anyone help me with the correct sizing for a replacement V drive belt, thanks
ubeaut
25th June 2019, 12:18 AM
I'm presuming you're referring to the old Symtec 1800 lathe and not Symantec as in Norton.
Do a search for Symtec 1800 on here and you should come up with a bit of info.
Cheers - Neil :U
UPO
25th June 2019, 06:55 PM
Have a look on Facebook, there is an active group there and bound to be someone who can assist. Have fun
Bauldy
25th June 2019, 11:21 PM
My 1500 uses an A41 belt. I know the motor is a larger size on the 1800, but the pulleys and belt may be the same.
Bauldy
Gemvale
26th June 2019, 11:29 AM
My 1500 uses an A41 belt. I know the motor is a larger size on the 1800, but the pulleys and belt may be the same.
Bauldy
I will try the belt size all the same.
Thanks
Lou