240v 3hp spindle moulder (30mm dia. tilting spindle)

[woodchopper]

240v 3hp (15amp plug) spindle moulder. Has 30mm dia shaft, 3 speeds, forward and reverse and tilting spindle. Was around 3k when new. Came from a school, but was never used due to WHS rules in schools. Some light surface rust on cast iron table from lack of use and damage to the paintwork in a couple of places.

Hoping to do a straight swap for a Festool Domino or a part swap for Festool ETS sander in vgc (plus a bit of cash). Thanks

No mitre gauge comes with the machine.


Thanks. https://uploads.tapatalk-cdn.com/20190703/6b1d2aa2be3f869db792724a1e7ffd05.jpghttps://uploads.tapatalk-cdn.com/20190703/c5a30547521cb962a76fda71aec2559d.jpghttps://uploads.tapatalk-cdn.com/20190703/2a014cc09d1493135a1556c9560f2649.jpghttps://uploads.tapatalk-cdn.com/20190703/aca31a4b657cb77ff04d840eac5b7453.jpghttps://uploads.tapatalk-cdn.com/20190703/438a35893f451a279130c17450aa1e92.jpg



Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

[woodchopper]

I would also consider selling the spindle moulder if unable to arrange a swap.


Sent from my iPhone using Tapatalk

[tomartomau]

Hi woodchopper,
How did such a machine get into the secondary school system in the first place?

[woodchopper]

Very good question. I have no idea. Perhaps a head of faculty bought it before looking into the WH&S side of things?


Sent from my iPhone using Tapatalk

[aarggh]

Hi woodchopper,
How did such a machine get into the secondary school system in the first place?

One place I worked at if they didn't spend all their allocated budget during the fiscal year, the following year it was deemed they don't need as much and got a lesser amount budgeted for the following year. This school may be the same?

[woodchopper]

Removed from the marketplace due to lack of interest.


Sent from my iPhone using Tapatalk