deckell
7th July 2019, 09:12 PM
Is there any reason i cannot/should not grind a 32ml flat scraper into a round nose scraper. thanks for any advice. deckell.
Chief Tiff
7th July 2019, 10:52 PM
No reason at all if you are talking about a standard Wood turning scraper; I’ve reshaped a couple.
deckell
7th July 2019, 11:29 PM
Thank you chief tiff.deckell.
Skew ChiDAMN!!
8th July 2019, 10:13 AM
Personally, I call square scrapers "blanks" that I'll re-profile to suit my needs. :D
Generally bull-nosed, although I have a couple which are only gently rounded.... for use by SWMBO. The only square scraper I have in the rack is a 5mm parting tool!
FWIW, I use scrapers quite often on materials such as Tas. Blackwood.
So, yeah... go for it!
China
8th July 2019, 04:23 PM
As said above they all start out square