Finished the router table....finally!!!

[Old_Tom]

Finally got my router table build finished. Just need to clear coat it and build a fence.
As you can see I have a Triton TRA001 mounted in the table with a dust collection hose fitted to the router port under the table. I will also include a dust port in the fence for above table collection.
There will be a "Y" fitting on the rear port to provide connection for the fence dust collection.

There have been a couple of changes along the way but I'm happy with the end result.
Don't look too close as you might just see a few of my build mistakes!!:oo:

Cheers!

[Bernmc]

you don't have enough routers

[Old_Tom]

you don't have enough routers

Oh you know how it is......I bought the Ken (cheap) to go in the table but it is single speed. Then got the Ryobi, but wouldn't be easy to do an above the table lift......so then came the Triton with variable speed AND above table lift capability!

Bought the trim router early in the piece also. It's a cheap variable speed off Ebay. Actually used it to do the round edges on the drawers etc.

You can never have enough tools... can you?:rolleyes::wink: