MWF FEED
20th November 2019, 03:12 PM
I’m looking for info on this machine, no makers name or even motor plate. It looks to be a shop built linisher assembled on a large grinder.
It was donated to a men’s shed who decided it wasn’t suitable for there needs and ended up with me thanks to a tip off by another forumite.
I maybe going back to the men’s shed with my gear to give an intro to Blacksmithing and possibly setting them up with a forge.
https://uploads.tapatalk-cdn.com/20191120/1435e8c5cfa583726ffb4a0b0fb063a4.jpg
https://uploads.tapatalk-cdn.com/20191120/78d2e01a1bf3d8e21e326b1e22ef58d4.jpg
https://uploads.tapatalk-cdn.com/20191120/e88f8b273bf9407c1f952a05bcd56e8d.jpghttps://uploads.tapatalk-cdn.com/20191120/58427d7858e2f7b83f91348aa3cbd02c.jpg
The linisher could possibly be made from off the shelf components but the plate steel frame made in house.
I’d like to fit a big wire wheel to it and possibly a vfd for speed control. The vfd may not be viable without knowing what type & spec motor.
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=204177&goto=newpost)
It was donated to a men’s shed who decided it wasn’t suitable for there needs and ended up with me thanks to a tip off by another forumite.
I maybe going back to the men’s shed with my gear to give an intro to Blacksmithing and possibly setting them up with a forge.
https://uploads.tapatalk-cdn.com/20191120/1435e8c5cfa583726ffb4a0b0fb063a4.jpg
https://uploads.tapatalk-cdn.com/20191120/78d2e01a1bf3d8e21e326b1e22ef58d4.jpg
https://uploads.tapatalk-cdn.com/20191120/e88f8b273bf9407c1f952a05bcd56e8d.jpghttps://uploads.tapatalk-cdn.com/20191120/58427d7858e2f7b83f91348aa3cbd02c.jpg
The linisher could possibly be made from off the shelf components but the plate steel frame made in house.
I’d like to fit a big wire wheel to it and possibly a vfd for speed control. The vfd may not be viable without knowing what type & spec motor.
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=204177&goto=newpost)