MWF FEED
13th January 2020, 10:40 PM
Hi,
I just bought a used Wespa AS4 band saw, and I am looking for instructions, or any advice for use...
Particularly:
- Adjustment of the alignment of the upper wheel
- Maximum blade width
- Operation of the cutting fluid system (filling, on/off, ...)
- How to read the indications given on the adjustment wheel (blades / cutting speeds, ...?) --> See picture of the wheel
- Operation of the hydraulic table system
- Explanations on the different belts inside the machine
I obviously started by asking Wespa, but they didn't keep any archives on these old machines. So I thought that I might find more informationon forums... If you (or one of your friends/acquaintances) own this machine and can help me (and in particular provide me with a user manual), I will be forever grateful ! ;)
20200112_124033.jpg (https://metalworkforums.com/attachment.php?attachmentid=384238&d=1578913882)
20200111_202218.jpg (https://metalworkforums.com/attachment.php?attachmentid=384237&d=1578913874)
I wish you a very nice day !
Stan
Attached Images
https://metalworkforums.com/images/attach/jpg.gif 20200112_124033.jpg (https://metalworkforums.com/attachment.php?attachmentid=384238&d=1578913882) (260.9 KB)
https://metalworkforums.com/images/attach/jpg.gif 20200111_202218.jpg (https://metalworkforums.com/attachment.php?attachmentid=384237&d=1578913874) (250.4 KB)
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=204411&goto=newpost)
I just bought a used Wespa AS4 band saw, and I am looking for instructions, or any advice for use...
Particularly:
- Adjustment of the alignment of the upper wheel
- Maximum blade width
- Operation of the cutting fluid system (filling, on/off, ...)
- How to read the indications given on the adjustment wheel (blades / cutting speeds, ...?) --> See picture of the wheel
- Operation of the hydraulic table system
- Explanations on the different belts inside the machine
I obviously started by asking Wespa, but they didn't keep any archives on these old machines. So I thought that I might find more informationon forums... If you (or one of your friends/acquaintances) own this machine and can help me (and in particular provide me with a user manual), I will be forever grateful ! ;)
20200112_124033.jpg (https://metalworkforums.com/attachment.php?attachmentid=384238&d=1578913882)
20200111_202218.jpg (https://metalworkforums.com/attachment.php?attachmentid=384237&d=1578913874)
I wish you a very nice day !
Stan
Attached Images
https://metalworkforums.com/images/attach/jpg.gif 20200112_124033.jpg (https://metalworkforums.com/attachment.php?attachmentid=384238&d=1578913882) (260.9 KB)
https://metalworkforums.com/images/attach/jpg.gif 20200111_202218.jpg (https://metalworkforums.com/attachment.php?attachmentid=384237&d=1578913874) (250.4 KB)
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=204411&goto=newpost)