MWF FEED
15th February 2020, 04:40 PM
Not wanting to use the mill recently without oil on all surfaces which require it, I used my ML& Nito32 as the oil plunger was full and only one I have atm.
Before I get into more work I need to acquire a second oil pump type unit, locate ALL the nipples :~ seems I need to modify the DRO on the X axis to be able to gain access without the need to constantly remove it a note to H&F
I have read the manual not one word of locations of these points however they are noted in the Parts list.:doh: Wish they supplied an oil pump unit with the machine trying to find a decent size one to suit all access points :~ not going well.
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=204564&goto=newpost)
Before I get into more work I need to acquire a second oil pump type unit, locate ALL the nipples :~ seems I need to modify the DRO on the X axis to be able to gain access without the need to constantly remove it a note to H&F
I have read the manual not one word of locations of these points however they are noted in the Parts list.:doh: Wish they supplied an oil pump unit with the machine trying to find a decent size one to suit all access points :~ not going well.
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=204564&goto=newpost)