aarggh
11th May 2020, 12:59 PM
Hi all, I've decided to sell my large cold saw as I bought it new from H&F around 5 or so years ago, planning to do a lot of welding work, but never got around to it, and realistically, probably never will.
The saw has done a few trial cuts when I first got it, and nothing since. So around 10mins work.
The condition is as new and still has the original packing grease on some parts, other parts I kept lubed with Fluidfilm (love that stuff!).
It's always been kept under a sheet indoors, and the pump system has never been used so is pristine, and runs super quiet.
They are a smidge under $2K new, ideally I'd like around $1100.
Here's the link to H&F for it:
S816 - CS-275 Cold Saw | Hare & Forbes Machineryhouse (https://www.machineryhouse.com.au/S816)
Pickups near Mulgrave or Hawthorn depending on date/times.
The saw has done a few trial cuts when I first got it, and nothing since. So around 10mins work.
The condition is as new and still has the original packing grease on some parts, other parts I kept lubed with Fluidfilm (love that stuff!).
It's always been kept under a sheet indoors, and the pump system has never been used so is pristine, and runs super quiet.
They are a smidge under $2K new, ideally I'd like around $1100.
Here's the link to H&F for it:
S816 - CS-275 Cold Saw | Hare & Forbes Machineryhouse (https://www.machineryhouse.com.au/S816)
Pickups near Mulgrave or Hawthorn depending on date/times.