MWF FEED
11th May 2020, 08:30 PM
Living on the Central Coast, any steel not covered rusts eventually. I got to thinking that it would be prudent to sew a cover for my lathe to keep moisture at bay. I cut wood in the same shed so it would keep the sawdust off as well. Then I was wondering whether the cover would retain moisture and exacerbate the rust issue. I've used curtain backing, thick, but somewhat breathable.
The only drawback is trhat I don't get to gaze longingly at the lathe when I'm in the shed.
Good or bad idea?
Attached Images
https://metalworkforums.com/images/attach/jpg.gif Cover.jpg (https://metalworkforums.com/attachment.php?attachmentid=386499&d=1589187703) (254.9 KB)
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=205025&goto=newpost)
The only drawback is trhat I don't get to gaze longingly at the lathe when I'm in the shed.
Good or bad idea?
Attached Images
https://metalworkforums.com/images/attach/jpg.gif Cover.jpg (https://metalworkforums.com/attachment.php?attachmentid=386499&d=1589187703) (254.9 KB)
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=205025&goto=newpost)