aarggh
21st May 2020, 06:54 PM
Hi all, this is another thing to go to help fund a sander and reclaim some room.
It's a Solidoodle Version 2.0 3D printer that my son absolutely, desperately required, needed, wanted, etc, and then barely used it because it didn't magically produce commercial quality objects in seconds!
It comes with all the cables/ PSU needed, as well as 5 large rolls of (1kg each roll I think) filament in blue, red, black, green and white. Most look like they've never been used.
It powers up fine and you can hear the steppers lock, lights work, fan start, etc, but I haven't tested it any further and frankly don't care to at the price I'm asking so selling it as is!
It uses the usual modular drivers which are about $3-$5 on Ebay if you blow any, which is unlikely as these are a very low load rating, but parts and upgrades are available all over Ebay cheap.
It has the heating plate, and at the time was quite a spec'ed up unit.
The filament rolls alone are worth $150 or so, but it needs to go, ideally I'd like $125 ONO, but make me an offer!
Pickup from Hawthorn or near Mulgrave depending on date/time.
It's a Solidoodle Version 2.0 3D printer that my son absolutely, desperately required, needed, wanted, etc, and then barely used it because it didn't magically produce commercial quality objects in seconds!
It comes with all the cables/ PSU needed, as well as 5 large rolls of (1kg each roll I think) filament in blue, red, black, green and white. Most look like they've never been used.
It powers up fine and you can hear the steppers lock, lights work, fan start, etc, but I haven't tested it any further and frankly don't care to at the price I'm asking so selling it as is!
It uses the usual modular drivers which are about $3-$5 on Ebay if you blow any, which is unlikely as these are a very low load rating, but parts and upgrades are available all over Ebay cheap.
It has the heating plate, and at the time was quite a spec'ed up unit.
The filament rolls alone are worth $150 or so, but it needs to go, ideally I'd like $125 ONO, but make me an offer!
Pickup from Hawthorn or near Mulgrave depending on date/time.