MWF FEED
17th June 2020, 05:20 PM
My old Porsche metal bandsaw has a small wire brush for removal of swarf from the blade.
These are no longer available and to fit one I would need to adapt the round wheel ones that are now being fitted.
Did some thinking and recalled the bandsaw at the steel outlet which had cutting fluid nozzle after cutting.
Some others on another forum said that they have done this also and supposedly works a treat.
So I fitted one today.
20200617_125640.jpg (https://metalworkforums.com/attachment.php?attachmentid=387264&d=1592372613)
20200617_125517.jpg (https://metalworkforums.com/attachment.php?attachmentid=387265&d=1592372688)
20200617_125559.jpg (https://metalworkforums.com/attachment.php?attachmentid=387266&d=1592372785)
Attached Images
https://metalworkforums.com/images/attach/jpg.gif 20200617_125517.jpg (https://metalworkforums.com/attachment.php?attachmentid=387265&d=1592372688) (221.1 KB)
https://metalworkforums.com/images/attach/jpg.gif 20200617_125559.jpg (https://metalworkforums.com/attachment.php?attachmentid=387266&d=1592372785) (106.7 KB)
https://metalworkforums.com/images/attach/jpg.gif 20200617_125640.jpg (https://metalworkforums.com/attachment.php?attachmentid=387264&d=1592372613) (214.8 KB)
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=205211&goto=newpost)
These are no longer available and to fit one I would need to adapt the round wheel ones that are now being fitted.
Did some thinking and recalled the bandsaw at the steel outlet which had cutting fluid nozzle after cutting.
Some others on another forum said that they have done this also and supposedly works a treat.
So I fitted one today.
20200617_125640.jpg (https://metalworkforums.com/attachment.php?attachmentid=387264&d=1592372613)
20200617_125517.jpg (https://metalworkforums.com/attachment.php?attachmentid=387265&d=1592372688)
20200617_125559.jpg (https://metalworkforums.com/attachment.php?attachmentid=387266&d=1592372785)
Attached Images
https://metalworkforums.com/images/attach/jpg.gif 20200617_125517.jpg (https://metalworkforums.com/attachment.php?attachmentid=387265&d=1592372688) (221.1 KB)
https://metalworkforums.com/images/attach/jpg.gif 20200617_125559.jpg (https://metalworkforums.com/attachment.php?attachmentid=387266&d=1592372785) (106.7 KB)
https://metalworkforums.com/images/attach/jpg.gif 20200617_125640.jpg (https://metalworkforums.com/attachment.php?attachmentid=387264&d=1592372613) (214.8 KB)
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=205211&goto=newpost)