bwheller
25th August 2020, 07:58 PM
Has anyone ever seen a 1/16" Rounded Cornering Router bit with a 1/8" Shank?
Brad.
Lappa
28th August 2020, 11:53 AM
The smallest Dremel bit I have is 1/8” round over and the smallest I can find is a 2.4mm which is 0.094” and your after 0.0635”.
The number is 612 if that’s of any help.
bwheller
30th August 2020, 05:32 PM
The smallest Dremel bit I have is 1/8” round over and the smallest I can find is a 2.4mm which is 0.094” and your after 0.0635”.
The number is 612 if that’s of any help.
Thanks mate. I managed to find a 1/4 shank 1/16" bit. Not exacty what I wanted but it'll do. It took some diging around as I needed a 5mm bearing on it too. Needed to fit into a 10mm recess. Its puzzing why dremel don't? Thanks again for your reply.